Operation Manual

28
Instr uc tion Ma nua l
AP01 : WJ32
Button D:
Change to SH-1
or SH-2
How to use Shoes Impact Meter
Shoes Impact Meter Display Selection of Shoes Impact Meter display
SPM_LOG mode
PACE_LOG mode
󰽨
* Unless the chronograph is reset, the Shoes Impact Meter display cannot be shown.
* Each horizontal dot of the Shoes Impact Meter represents different number of units of the shoes impact value depending on the range of the value.
󱛠0 ~ 100 : One dot represents 10 units of the shoes impact value.
󱛠100 ~ 400: One dot represents 20 units of the shoes impact value.
󱛠400 ~ : One dot represents 100 units of the shoes impact value.
0100 400900
SPM/PACE_CHR mode Shoes Impact Meter display
󰽧
* When Shoes Impact Meter display has
been changed over to the other:
When button E is pressed to return to
the SPM/PACE_CHR mode, flashing
SELECTED is shown for 2 seconds to
warn t
hat the display has been changed
over.
The Shoes Impact Meter provides the guideline of the cushioning performance of
the shoes on the basis of the ASICS running shoes.
・ The Shoes Impact Meter is equipped with two displays (SH-1 and SH-2) that can
show the shoes impact of two different pairs of shoes.
・ When two pairs of shoes are used alternately for running, the shoes impact value
of each pair can be indicated separately
Shoes impact
value
Shoes Impact
Meter display
Shoes No.
Shoes impact value Indication of Shoes Impact Meter Cushioning performance of mid-sole
0 Brand new condition
 100 Condition fit for use in a race
 400 Condition after long use
400  Worn-out condition
󰽨
󰽨
Guideline of shoes impact
󰽨
󰽨
Button B: Initialization
of Shoes Impact Meter