Operation Manual

27
Instr uc tion Ma nua l
AP01 : WJ32
How to Use PACE Function
DISTANCE mode
* When no distance data is recorded in memory:
The total distance of a run is accumulated, and stored in memory on a
monthly basis. Up to 12 months of such data is stored, and can be
recalled month by month in order starting from the data of the current
month.
Distance data of the
current month
Distance data of the
previous month
Distance data of 11
months ago
󰽨 󰽨
Distance
data
Confirmation of whether or not the
selected data should be deleted
The entire distance
data has been de-
leted.
BB
Press for
more than
2 seconds.
Keep the button
pressed for 2 more
seconds or longer.
Beep,
beep,
beep
Release the button.
* The data has not been deleted yet.
* Before deleting the distance data, check that the chronograph is reset.
* The distance data cannot be deleted month by month.
* Deletion of the number of steps data will not affect the other data in memory such as the data
recorded in the SPM_LOG, PACE_LOG and DISTANCE modes, which remains undeleted.
Unit: km Unit: mile
When the distance reaches
100 km
When the DISTANCE mode appears, “DISTANCE” is shown in the lower row of
the display for 1 second before the newest monthly distance data is shown.
Distance run
: Deletion of data
Month
Button E: Selection of
monthly distance data
Year
Measurement
month
Measurement year
The distance data is shown in the measurement unit you have set in the BASIC SETTING mode.
The distance is displayed to 2 decimal places up to 99.99 km,
and with an integer thereafter.
Button B: Mode change
Button C: Lighting up backlight
Button B (pressed for
more than 2 seconds)
Distance data
󰽨
Deletion of distance data
Changeover of measurement units
Confirmation beep