Operation Manual

22
 When the chronograph is reset, PACE and L/M
(Lap Memory: number of measurement data
stored in memory) are shown alternately in the
lower row of the display.
 The number of measurement data in memory accumulates each time
running data measurement is made.
 Up to 300 measurement data can be stored in memory.
Instr uc tion Ma nua l
AP01 : WJ32
When the PACE_CHR mode appears, “PACE_CHR” is shown in the lower
row of the display for 1 second before the chronograph display is shown.
* For the distinction among the displays when the chronograph is reset, measuring and stopped,
see P. 26.
Selection of measurement display
Note that the measurement display cannot be changed during measurement.
How to check the Shoes Impact Meter
* Press button E to return to the PACE_CHR mode.
* Selection of the shoes (SH1 or SH2) can be made by pressing button D.
The Shoes Impact Meter for the selected shoes will be shown thereafter.
Checking the memory capacity
Detailed information has indicated to P. 28
Number of laps
in memory
Button B: Mode
change
Button D:
Selection of measurement display
Button E: Lap/reset
Shoes Impact Meter
Button A: Start/stop
PACE_CHR mode
Shoes Impact Meter
󰽧
󰽨
󰽨
󰽨
󰽨
Distance run
Split time
PACE PACE
Distance run PACE
Lap time
Split time Current time
Lap time
Distance run
Current time
Button C: Lighting up
backlight
How to Use PACE Function
PACE_CHR (Chronograph) Mode (Preparation Before starting Running)
󰽧 󰽧 󰽧
󰽧
* For more detailed information on the Shoes Impact Meter, see P. 28.