Operation Manual
17
Instr uc tion Ma nua l
AP01 : WJ32
Log data element
Year, month and date of measurement, total time, and average SPM
Year, month and date of measurement, and total number of steps
Split time, lap time, average SPM of the lap, and lap No.
Best lap time, and lap No.
Average lap time
Total time
Average
lap time
Best lap time
Lap-by-lap
data
Total number
of steps
How to Use SPM Function
SPM_LOG Mode
* When no log data is stored in memory:
Log data is stored and recalled in a set on a run-by-run basis.
The newest log data set is displayed first. Press button A or D to select the desired log data set.
With each press of button E, the log data elements can be checked in the following order.
By keeping button E pressed for more than 2 seconds while the total time or lap-by-lap data
is displayed, the SET_UP mode is activated (
for more details of the SET_UP mode, see P. 19).
* Note that different data elements are shown in the SPM_LOG and PACE_LOG modes.
When the SPM_LOG mode appears, SPM_LOG is shown in the lower row of the display
for 1 second before the Total Time display is shown.
Button A
: Selection of log data set
The newest log data set in memory
Button E: Selection of log data element
Button D
: Selection of log data set
Button B: Mode change
Button C
: Lighting up backlight
Button B (pressed for more
than 2 seconds): Deleting data
Button E (pressed for more than 2
seconds): Activation of SET_UP mode
Details of log data in SPM_LOG mode
Selection of log data set
How to check the log data elements
The next previous log
data set
The newest log data
set in memory
The oldest log data
set in memory
SET_UP mode is
activated (see P. 19).
SET_UP mode is
activated (see P. 19).
Average lap time
Split time
Year, month,
and date of
measurement
Year, month, and date
of measurement
Total number
of steps
Total time
Lap time
Lap No./
Average SPM of the lap
Average lap time
Press for more than
2 seconds.
Press for more than
2 seconds.
Average SPM/
TOTAL
BEST/ Lap No.