Operation Manual

14
How to Use SPM Function
SPM_CHR (Chronograph) Mode (Preparation Before starting Running)
When the SPM_CHR mode appears, SPM_CHR is shown in the lower
row of the display for 1 second before the chronograph display is shown.
* For the distinction among the displays when the chronograph is reset, measuring and
stopped, see P. 16.
Selection of measurement display
Note that the measurement display cannot be changed during measurement.
How to check the Shoes Impact Meter
* Press button E to return to the SPM_CHR mode.
* Selection of the shoes (SH1 or SH2) can be made by pressing
button D. The Shoes Impact Meter for the selected shoes will
be shown thereafter.
* For more detailed information on the Shoes Impact Meter, see P. 28.
Checking the memory capacity
When the chronograph is reset, SPM and L/M
(Lap Memory: number of measurement data stored
in memory) are shown alternately in the lower row of the display.
The number of measurement data in memory accumulates each time
running data measurement is made.
Up to 300 measurement data can be stored in m
emory.
Number of laps
in memory
Button B: Mode change
Button C: Lighting up backlight
Button D: Selection of
measurement display
Button E: Lap/reset
Shoes Impact Meter
Button A: Start/stop
Instr uc tion Ma nua l
AP01 : WJ32
SPM_CHR mode Shoes Impact Meter
󰽧
󰽨
󰽨
󰽨
󰽨
Split time
SPMSPM SPM SPM
Split time
Lap time
Lap time
Current time
󰽧 󰽧 󰽧
󰽧