User's Manual

ManualsBrandsAsiatelco Technologies ManualsComputers & AccessoriesLTE WiFi Router

QuickStartGuide

DearCustomer

ThankyouforPurchasingtheLTEWiFiRouter.Haveawonderfulexperiencewithlightningspeed

downloads.

ForinformationLTEstandsfor“LongTermEvolution”andCPEstandsfor“CustomerPremises

Equipment”.

BeforeyouBegin

Checkthefollowingitemsinthispackage:

Accessories:

Item Quantity

Antenna 2

POWERSUPPLY 1

Battery 1

Getti

ngtoknowtheCPE

Note:

Thefiguresbelowareprovidedonlyforreferencepurposes.Seetheactualproductformoredetails.

Summary of content (6 pages)

PAGE 1
Quick Start Guide Dear Customer Thank you for Purchasing the LTE WiFi Router. Have a wonderful experience with lightning speed downloads. For information LTE stands for “Long Term Evolution” and CPE stands for “Customer Premises Equipment”. Before you Begin Check the following items in this package: Accessories: Item Antenna POWER SUPPLY Battery Quantity 2 1 1 Getting to know the CPE Note: The figures below are provided only for reference purposes. See the actual product for more details.
PAGE 2
1. WPS Press WPS button for 5 seconds to open the PBC function 2. (RST) RESET One can restore the default settings of the CPE by holding down this button for more than 10 seconds. Restoring the default settings of the CPE will override all the previous settings. 3. Phone Port This Port is used for connecting Phone using a Phone cable 4. LAN1‐LAN3 Indicators This indicator is on when an Ethernet device has been connected to the relevant port. 5.
PAGE 3
 Keep the CPE away from household electrical appliances that produce strong electric or magnetic fields such microwave ovens, refrigerators or dish satellite antennas. Connecting the CPE Install the USIM card This CPE is specially designed for the 4G LTE network. Please check that you have a valid USIM card from the service provider.  Open the bottom cover on the CPE  Insert a valid USIM card into the USIM card slot.  Insert a Battery into the Battery slot ,put the Bottom cover back.
PAGE 4
Note: By default the IP address of the CPE is 192.168.0.1, the subnet mask is 255.255.255.0 and the user log in password is admin and password is admin. It is recommended that the IP address and DNS settings are obtained automatically. 3. Run internet explorer. Enter http://192.168.0.1. In the address bar and press enter. 4. Enter the correct user name and password in login window and login. After the password verification, the web based utility functions can be performed. 5.
PAGE 5
Throughput performance is not OK  Ensure that there are not too many users under the same LTE Cell.  Ensure the wireless environment is good.  Check the value of SINR thru GUI. >10 dB is a good value for good throughput.
PAGE 6
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.