User's Manual

CDMA cordless Phone
7
3 Basic Operations
3.1 Power On/Off
3.1.1 Power On
Press the Power On/Off Key for 3 seconds to power on the Phone. The
phone is in standby mode and is ready to use.
3.1.2 Power Off
Press the Power On/Off Key for 3 seconds to power off the Phone.
3.2 Make a Call
Enter a destination number you wish to call, then press “SEND” Key.
(Note: To modify digits you enter, you can press “Right Soft” Key to delete
wrong digits first and then enter new digits).
Once the call is connected, the Phone’s screen will display the number you
have dialed, and the time duration of the call.
3.3 Receive a Call
When there is an incoming call, the Phone will ring and display the
number of the incoming call (if the number is available). You can press “SEND”
Key to answer the incoming call. The ring tone and its volume can be changed
in the setting menu.
3.4 End a Call
Press “END” Key to end a phone call.
3.5 Speed Dial
User can set up speed dial numbers.
 Save the Phone number in the contact list of Phone ;
 Set up a speed dial number (any number from 2 to 9) through menu “Main
menu/contacts/speed dial”;
 Choose a phone number from contact list , Press “SELECT” ,then save it;
 When using speed dial function, press speed dial number (any number from
2 to 9) then #, and “SEND” Key .
3.6 Battery Using Notes
 Li+ rechargeable batteries should be used in the Phone.
4 Idle Screen
Power on the phone. Where’s signal, the Phone will display the following
idle screen: