User's Manual

CDMA cordless Phone
16
d) Change Password: You can change the security password through this
menu. The user must remember the new password.
e) Set Keypad Password: You can change the Keypad locking code. The
default number is 0000. Once this is set and Keypad is locked, each time
before using the phone, the Keypad password must be entered.
f) Load Default: The menu allows you to reset the Phone. This is very
important feature. In case your Phone is not working in the way you
expected, you can always use “Load Default” to reset your Phone to its
default settings.
4. Call Setup: The menu allows you to set up call answer mode, which includes:
a) Auto Answer: Allows the phone to answer incoming calls automatically.
b) Voice Privacy: Turning on “Voice Privacy” to enhance the security of
the call by voice encryption.
c) Auto Dial Time: When making a phone call, dial the number and wait
for a few seconds, the call will be made automatically without pressing
Send Key.
Figure 44 Call setup
5. Network Service :
Figure 45 Network Service
a) Call Forward: You can forward incoming calls to a designated phone
number. You can forward incoming call under the following situations:
 Forward If Busy
 Forward If No Answer
 Forward All Calls
 Forward Crytic
b) Call Waiting: You can enable/disable call waiting function through this
menu.
6. Phone Info
a) Phone Number: Your phone number can be input and stored by using
this menu.
b) SW Version: This menu can display the software version.
c) Hardware Version: This menu is used to list the hardware version.