User's Manual

6
3.3 Assemble Antenna
4 Basic Operations
4.1 Power On/Off
Hook up handset to your phone and put the handset to hang up position, then connect DC power
supply to the “DC IN” port at the rear of the phone or insert the battery to the battery chamber. Then
long press End Key to turn on the phone, your phone should go to idle screen and is ready to use.
You can turn the phone off with long pressing the End Key.
Note: Be sure to insert the battery before using the phone
4.2 Make a Call
While your phone is power on and at idle screen, enter a destination number you wish to call and then
press Redial Key. (Note: To modify digits you enter, you can press Clear Key to delete wrong digits
first and then enter new digits). Once the call is connected, the phone’s screen will display the number
you have dialed, and the time duration the call has lasted.
The phone also has a speaker. To use the speaker to make a call, press SPEAKER Key, enter a
phone number, and press REDIAL Key.
4.3 Answer a Call
When there is an incoming call, the phone will ring and display the Phone number of the incoming call
(if the number is available). You can pick up the handset or press SPEAKER Key to answer the
incoming call. The ring tone and ring-tone volume can be changed in the sounds menu.
4.4 End a Call
You can end a call by pressing END Key. If you are using the handset for a phone call, hanging up
the handset will end the call automatically.
4.5 Call Waiting
If you have enabled call waiting feature, you can suspend the current call party and switch to the new
incoming call by click Answer or Green key. And also, you can switch with the current caller and
suspended caller by click Green key. You can also finish the current call by click End key then
continue to speak with the suspended caller.