User's Manual

12 Dialer

12.1 Connect phone with PC

Connect the data terminal with PC/laptop by using the accompanying data cable. Connect Interface 1

with Data Terminal, and interface 2 with PC’s USB port. Plug AE80i to the USB interface of the PC (as

shown below for Laptops and Desktops)

Figure 5 connect the phone with PC

12.2 Installing the Dialer

1. Connect device to the PC

2. Your PC automatically detects and recognizes new hardware and starts the installation driver

and dialer.

3. Follow the prompts of the installation wizard.

4. After the program is installed, the shortcut icon of the dialer named as Datacard Connect is

displayed on the desktop of your system.

If installation window does not pop up automatically, please check whether the auto plug& play

option is enabled or not in PC. Also verify antivirus settings.

You can access to internet easier and manager the SMS in phone. Main interface is below:

12.3 Starting the Dialer

1. After the dialer is installed, the dialer is launched automatically

2. Every time AE80i is connected to the PC, the dialer is launched automatically

3. You can also double-click the shortcut icon on the desktop to launch the program.

12.4 <Connect>

12.4.1 Set up a profile

The profile should already be created but if not please follow the instructions below.

1. Click

2. Select <Profile>

3. Get current profile from default profile.