User's Manual

HOW TO DO 360º STUNT ROLLS
Doing 360º stunt rolls with the Neutron™ Quadrocopter is as easy as 1-2-3:
1. Hover the quadrocopter in still position making sure that you have at least 3 feet of clearance above and
below quadrocopter.
2. Press down and hold the 360 stunt button and you will enter the stunt roll mode which is indicated by
a rapid beeping (see diagram J).
3. Decide which direction you want it to flip and quickly push the right control stick in the direction you
want to flip your Quadrocopter. You have 4 choices a) Forward Roll, b) Backwards roll, c) right side roll,
d) left side roll.
IMPORTANT NOTICE: You must hold down the stunt button as you flip your helicopter.
4). To exit the Stunt Rolls mode, simply release the button and push the directional control stick in any
direction.
J
9 10
F
L R
B
360˚Stunt Rolls/Speed button
Your NEUTRON™ helicopter comes equipped with an onboard digital camera that takes both video and still
Photographs. Now you can have hours of fun creating aerial photography and videos for family and friends.
WHAT YOU WILL NEED TO GET STARTED USING YOUR CAMERA
1. One Micro SD card (not included)
2. One Micro SD card reader (included)
3. One Computer with USB port and Windows Media Player or other Media player that can play AVI files
(not included).
FORMATTING YOUR MICRO SD CARD
Before you can begin to take videos or digital photographs you must first format your Micro SD card. To format
your Micro SD card simply place the Micro SD card into the included USB SD card reader and plug it into your
computers USB port (See diagram 1 and 2 below). After a few moments an icon will appear on your Desktop.
Right click on the Icon and follow instructions to format your Micro SD card.
INSTALLING THE MICRO SD CARD IN YOUR NEUTRON
TM
HELICOPTER
• Disconnect the power cord between the battery and helicopter.
• Place the formatted SD card into the back of the helicopters digital camera port. ( see diagram 3 below) Push
gently and consistently until you hear and feel the micro SD card “click” into the digital camera slot.
• Turn the helicopter on and make sure that it is both fully charged and properly synced to the Controller
(see HOW TO SYNC YOUR HELICOPTER on page 4 ).
• When you have successfully installed your micro SD card and your helicopter is connect to the battery, you
will see a solid red LED lights on the helicopter belly. This red LED lights is accompanied by a separate
flashing on its side (see camera indicator light diagram 4 below). NOTE: If you see a continuous rapid flashing
light this means you have not installed your Micro SD card correctly or there is a problem with your SD card.
If this happens first make sure that the product is not in Video Record mode and if not then please reformat
and try again. If you continue to encounter problems call our customers service line at 949.566.9573 Ext 1
for assistance.
TAKING DIGITAL PHOTOS
To take photographs simply press and release the PHOTO button on the face of the controller (refer to
CONTROLLER DIAGRAM on pg. 3) the red light on the belly of the camera will flash RED 1x. As this red light is
flashing it is taking one still photo. When the camera ready light becomes solid again you are ready for your
next photograph.
RECORDING VIDEOS
To record a video first make sure that your helicopter is fully charged and that you have correctly installed the
micro SD card in the Helicopters camera port. Begin recording a video by pressing the VIDEO RECORD button
on the face of the controller (see CONTROLLER DIAGRAM on page 3). The red indicator light will continuously
flash RED indicating that VIDEO recording is in progress. To stop the video recording, press the RECORD button
a second time. The red indicator light on the belly of the camera will change to solid indicating that video
recording has stopped and the Camera is in ready mode again.
USING YOUR ON BOARD CAMERA AND VIDEO RECORDER
Red LED
Light
micro SD card facing up
micro SD card
goes in back slot
Diagram 4Diagram 3Diagram 2Diagram 1