User's Manual
Propeller Blade
Camera
Li-Poly Battery Compartment
CLOUD RIDER™ HD 2.0 QUADROCOPTER DIAGRAM
CLOUD RIDER™ HD 2.0 REMOTE DIAGRAM
3 4
FLIGHT PREPARATION
has been fully charged.
Make sure the empty space has no obstacles. Set your Cloud Rider™ HD 2.0 on a clean flat level surface before
take-off.
DO NOT ATTEMPT TO FLY YOUR Cloud Rider™ HD 2.0 IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR
LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND POSSIBLY EVEN CAUSE BODILY HARM.
SYNCING YOUR CLOUD RIDER™ HD 2.0
Important! When syncing your Cloud Rider™ HD 2.0 quadrocopter with the controller always make
sure that the quadrocopter is on a flat level surface and your digital trim settings are in the center
position. These will insure the 6 Axis gyro is properly programmed to mimic your trim settings.
Syncing your aircraft:
1.
(see diagram D). The led indicator lights under the rear arms of the Cloud Rider™ HD 2.0 should begin to flash.
FLYING TIPS
should have at least a 200 foot radius.
DO NOT FLY YOUR CLOUD RIDER™ HD 2.0 IN FOUL WEATHER!
WARNING
Speed Setting
Throttle & Spin
Antenna
360º Stunt Button
FRONT
REAR
D








