Specifications Sheet

AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
[phone] • [phone]
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
SURFACE MOUNTED VERTICAL BABY CHANGING STATION (PG 1 of 2)
MODEL №: 9015
ISSUED: 08/13
REVISED: 9 Oct 2014
SPECIFICATION
Surface Mounted Baby Changing Station shall be vertical format and shall protrude no more than 4” (102) from wall when in
retracted position. Unit shall comply with ASTM F2285-04 and EN 12221-1. Unit shall support a static load of 300 lbs. (136.1
kg) and be tested in excess of 350 lbs. (158.8 kg). Unit shall be fabricated of non-porous plastic (FDA approved HDPE) tested
according to ASTM G21 and ASTM G22. No parts of the operating mechanism shall be accessible when unit is open or closed
to provide a tamper-resistant and pinch proof user environment. Unit shall have a damped gas spring to assist user in opening
and closing bed tray with the use of one hand. Unit shall be provided with one integral heavy-duty bag hook. Unit shall provide
a bed-liner dispenser that may be easily converted to a multi-fold towel dispenser with no adapters. Unit shall provide graphics
and instructions in four languages on interior back. Unit shall be provided with an adjustable two-part vinyl coated child protec-
tion safety-strap mounted with concealed fasteners on high walls of cradle. Entire unit shall be assembled of completely sealed
components to provide easy cleaning and no penetration zones to harbor microbes or bacteria. Unit shall mount on standard stud
wall dimensions and with proper anchoring may mount on all suitable wall constructions. Mounting fasteners shall be con-
cealed after installation using color matched recess plug-covers supplied. Unit shall be light grey in color and shall be recyclable
at end of usable life. Unit shall be warranted for five (5) years against defects in material or workmanship.
Surface Mounted Vertical Baby Changing Station shall be Model № 9015 as manufactured by American Specialties, Inc.,
441 Saw Mill River Road, Yonkers, NY 10701-4913