Specifications

Operation 19

Operation

Session Programming Session Programming Default Parameters INUSE flag = N

REF day = 000

OFFSET = 00:00

For all Sessions:

Session Flag = N

Start Time = 00:00:00

End Time = 00:00:00

RCI = 20

MSV = 3

ELM = 10

RNG = 0

MDM Modem Parameters MODE=OFF

TYPE = 0 (US Robotics)

PORT = B

BAUD RATE = 38400

BEEP LED display and warning beep On (Z-Surveyor and Z-FX)

Off (Z-Sensor)

CTS Clear to send port setting On

LPS Loop parameter setting 01, 2, 3

MET meteorological parameter setting All ports off

INIT-STR:No

TRIG-CMD:*0100P9

INTVL:5

TLT Tilt Meter parameter setting All ports OFF

INIT-STR:No

TRIG-CMD:*0100XY

INTVL:1

NMEA messages NMEA Message Output Status OFF in all ports

PER NMEA Messages Output Rate 001.0

RCI Raw Data Output Rate/Recording Rate 020.0

MSV Minimum Number of Satellite’s for Data

Recording/Output

ELM Elevation Mask for Data Recording/Output 10

REC Record Data Flag Y

MST Minimum Number of Satellite’s for

Kinematic Operation

ANH Antenna Height (before session) 00.0000

ANA Antenna Height (after session) 00.0000

SIT Site ID Name ????

EPG Kinematic Epoch Counter 000

Table 2.4: Default Values (continued)

Parameter Description Default