Specifications

148 Z-Family Technical Reference Manual
ALL: Disable All NMEA Messages
$PASHS,NME,ALL,c,OFF
Turn off all enabled NMEA messages, where c is the specified serial port.
Example: Turn off all NMEA message currently sent out through port B
$PASHS,NME,ALL,B,OFF <enter>
ALM: Almanac Message
$PASHS,NME,ALM,c,s
Enable/disable the almanac message where c is the receiver serial port and s is ON or
OFF.
Example: Enable ALM message on port C
$PASHS,NME,ALM,C,ON <enter>
$PASHQ,ALM,c
Query the almanac message, where c is the optional output port.
Example: Query almanac data message to receiver port D
$PASHQ,ALM,D <
ENTER>
Satellite information $PASHS,NME,ALM
$PASHS,NME,DAL
$PASHS,NME,GSA
$PASHS,NME,GSN
$PASHS,NME,GSV
$PASHS,NME,SAT
Enable/disable almanac data
Enable/disable decimal almanac data
Enable/disable SVs used message
Enable/disable signal strength/satellite number
Enable/disable satellites in view message
Enable/disable satellite status message
148
150
159
161
163
178
Time Synch $PASHS,NME,ZDA Enable/disable time synchronization message 185
Track and speed $PASHS,NME,VTG Enable/disable velocity/course message 182
Table 6.78: NMEA Data Message Commands (continued)
Function Command Description Page