Specifications
116 Z-Family Technical Reference Manual
Example: set *9900ID to the INIT STRING_ TLT field.
$PASHS,TLT,INIT,A,9900ID <enter>
TLT,INTVL: Tiltmeter Interval
$PASHS, TLT,INTVL,c,d
Set the interval for the query of the tiltmeters.
Example: set 10 to the TLT SAMPLE field
$PASHS, TLT,INTVL,D,10 <enter>
$PASHQ,TMP,c
This command queries the receiver’s internal temperature, where c is the optional
output serial port.
If the internal temperature of the receiver reaches 80°C, an alarm is generated. When it reaches
82
°C, the receiver will shut off.
Example: Query receiver for temperature
$PASHQ,TMP <enter>
$PASHR,TMP
Return message:
$PASHR,TMP,f1,*cc <enter>
Example: $PASHR,TMP,+35.50*27 <enter>
Table 6.52: TLT,INTVL Message Structure
Parameters Description Range
c Serial port connected to the tiltmeter A - D
d sample interval for a tiltmeter 1-86400 sec
(default = 1)
Table 6.53: TMP Message Structure
Return
parameter
Description
f1 Receiver internal temperature in degrees Celsius
*cc checksum