Specifications

Command/Response Formats 107
Commands
the same or another PCMCIA card is inserted into the receiver, the receiver will
automatically restart data recording. The Restart command is necessary to restart data
recording only if the Stop command is used, but the PCMCIA card is not actually
removed.
See $PASHQ,RAW command for a list of the various states this parameter can take
internally.
Example: Disable recording data
$PASHS,REC,N <enter>
REC,N will disable recording but will not close the session. Whenever REC,Y is issued, recording
will resume in the same session. REC,S will close the session, and a new session will be created if
REC,R is used or if the card is reinserted.
RID: Receiver ID
$PASHQ,RID,c
Request information about the receiver type, firmware and available options, where c
is the optional output port.
Example: Query the current port for receiver identification
$PASHQ,RID <enter>
$PASHR,RID
The return message is in the form:
$PASHR,RID,s1,d2,s3,s4,s5*cc <enter>
Table 6.41: REC Message Structure
Setting parameter Description Range
c ’Y’ Record data
‘N’ Do not record data
‘S’ Stop data recording
‘R’ Restart data recording
’Y’ / ‘N’ / ‘S’ / ‘R’
Table 6.42: RID Message Structure
Return Parameters Description Range
s1 Receiver type UZ
d2 Channel option
Codeless option
3 (C/A, PL1, P L2)
0