Specifications
Command/Response Formats 101
Commands
PJT: Log Project Data
$PASHS,PJT,c1s2s3s4s5s6
This command allows you to enter project data related to the station occupation. This
information will appear in the S-file and in the $PASHQ,INF query.
There are no commas between Parameters.
Example: Set project data with the following settings:
• Session = A
• Receiver ID = 123
• Antenna ID = 456
• Month and Day = July 12th (0712)
• Operator Initials = DWR
• Comment = TESTPROJ
$PASHS,PJT,A1234560712DWRTESTPROJ
Table 6.31: PJT Parameter Table
Parameter Description Range
c1 Session 1 character alphanumeric
s2 Receiver ID 3 character alphanumeric
s3 Antenna ID 3 character alphanumeric
s4 Month and Day (mmdd) mm = 01-12
dd = 01-31
s5 Operator Initials 3 character alphanumeric
s6 Comment 9 character alphanumeric