Specifications

100 Z-Family Technical Reference Manual
PHE: Photogrammetry Edge (Event Marker Edge)
$PASHS,PHE,c
Sets the photogrammetry time tag to either the rising or falling edge of the pulse. The
Event Marker receiver option (E) must be installed for this command to work.
Example: Set the photogrammetry edge to the falling edge.
$PASHS,PHE,F <enter>
$PASHQ,PHE,c
Query photogrammetry edge setting, where c is the output port and is not required to
send the output message to the current communication port.
Example: Query photogrammetry edge setting to port C.
$PASHQ,PHE,C <enter>
$PASHR,PHE
The response message is in the form:
$PASHR,PHE,c*cc <enter>
Table 6.30 on page 100 outlines the response format.
Table 6.29: PHE Parameter Table
Setting parameter Description Range
c direction of photogrammetry edge ‘R’ - rising (default)
‘F’ - falling
Table 6.30: PHE Message Structure
Return Parameters Description Range
c photogrammetry edge ‘R’ - rising
‘F’ - falling
*cc checksum N/A