Specifications

94 Z-Family Technical Reference Manual
MDM,INI: Initialize Modem Communication
$PASHS,MDM,INI
The $PASHS,MDM,INI command establishes communication between the modem
and the receiver. This command must be run to initiate modem communication after
modem parameters have been set using the $PASHS,MDM command.
Example: Initialize modem communication
$PASHS,MDM,INI <enter>
$PASHR,MDM,INI
If the initialization is successful the response message is in the form:
$PASHR,MDM,INI,OK*cc <enter>
If the initialization is not successful, the response message is in the form:
$PASHR,MDM,INI,FAIL*cc <enter>
MET: Meteorological Meters Set-up
$PASHQ,MET,c
Query meteorological meter setup, where c is the optional output port and is not
required to direct the response to the current port.
Response message:
MET METER PARAMETERS SETTINGS
PRTA:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTB:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTC:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTD:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
MET,CMD: Meteorological Meters Trigger String
$PASHS,MET,CMD,c,s
Set meteorological meters trigger string, where c is the output port and s is the trigger
string.
Table 6.22: MET,CMD Message Structure
Parameters Description Range
c Serial port connected to the meteorological meters A - D
s trigger string of meteorological meters excluding the starting ’*’
sign
Limited to 20
alphanumeric
characters