Specifications
88 Z-Family Technical Reference Manual
INI: Receiver Initialization
$PASHS,INI,d1,d2,d3,d4,d5,c6
The INI command resets the receiver memory, sets the serial port baud rate to the
specified rates, and/or sends the modem initialization string through the specified
port.
d24 Barometric pressure after data collection (millibars) 0 - 9999
*cc Checksum
Table 6.14: INI Parameter Description Table
Parameter Description Range* Default
d1 Port A baud rate code 0-9 5
d2 Port B baud rate code 0-9 5
d3 Port C baud rate code 0-9 5
d4 Port D baud rate code 0-9 5
d5 Reset Memory Code 0-3 n/a
c6 Modem initialization
Port, 0 = No initialization
A-D, 0 n/a
* Refer to Table 6.15 on page 88 for baud rate and Table 6.16 on
page 89 for reset memory codes.
Table 6.15: Baud Rate Codes
Code Baud Rate Code Baud Rate
0 300 5 9600
1 600 6 19200
2 1200 7 38400
3 2400 8 57600
4 4800 9 115200
Table 6.13: INF Message Structure (continued)
Return
Parameters
Description Range