Instruction manual

Command Response Formats Page 61
Command
Set HDOP Mask
$PASHS,HDP,X
This command sets the value of the HDOP mask. The command structure is
$PASHS,HDP,x where x is a number between 0 and 99. The HDOP default is 4.
Example:Set HDOP mask to 6
$PASHS,HDP,6
Reset Receiver Memory and Communication Parameters.
$PASHS,INI
This command resets the receiver memory and serial baud rate. The command
structure is $PASHS,INI,x,y,z,m,c where the fields are as described in Table 4.13.
74560647 745th GPS week
6th day
06 th hour
47th minute
2051 size of file = 2051 kilobytes
???? Site name of 19th file
74631651 746th GPS week
3rd day
16th hour
51st minute
0003 size of file = 3 kilobytes
*35 Checksum
Table 4.13: Memory Reset Codes
Field Description
x Baud rate setting for port A:
0=300 6=19200
1=600 7=38400
2=1200 8=57600
3=2400 9=115200
4=4800
5=9600
y Port B same as above
z Port C same as above
Table 4.12: Typical FLS Message (continued)
Item Description