Product Manual

172
Set Command Library
1. Establish a connection with the receiver from FAST Survey
as described in How FAST Survey Interfaces With Your
Equipment Via Bluetooth on page 237.
2. Select Equip>GPS Rover and then tap on the RTK tab
3. In the Device field, select “ARF7474..” corresponding to
the license-free radio used.
4. Tap on and complete the license-free radio settings.
5. Still on the RTK tab and in the same Device field, select
“Internal GSM”.
6. Tap on and and complete the GSM settings.
7. Tap to complete the receiver setting.
Activating RTC Bridge
• In FAST Survey, select Equip>GPS Utilities and then tap on
the Send Command button.
• In the combo box, type the following command, assuming
port E is the input port and port A the output port:
$PASHS,BRD,ON,0,E,A
• Tap on the Send button. The RTC Bridge function is
activated once the receiver has executed the command
and the $PASHR,ACK*3D line has been returned to FAST
Survey.
• Tap twice to close the GPS Utilities window and return
to the FAST Survey menu.
NOTE: As for the configuration of the rovers supposed to
receive the RTK corrections from this receiver, there is
nothing else to be done apart from configuring the licence-
free radio connected to each of them. Setting this radio can
be done using FAST Survey, from the RTK tab of the GPS Rover
window (select the appropriate radio model in the Device
field).