Product Manual

150
Using Serial Commands
$PASHS,PAR,LOD
Configure receiver from PAR
File
$PASHS,PAR,SAV
Save receiver config to PAR
File
$PASHS,PEM Position elevation mask $PASHQ,PEM Position elevation mask
$PASHS,POP Internal update rates $PASHQ,POP Internal update rates
$PASHS,POS Antenna position
$PASHS,PPS 1 PPS properties $PASHQ,PPS 1 PPS properties
$PASHS,PRT Baud rates $PASHQ,PRT Baud rates
$PASHS,PWR,OFF Powering off the receiver
$PASHS,PWR,PAR Power management $PASHQ,PWR Power status
$PASHS,RAW Raw data messages (ON/OFF) $PASHQ,RAW Raw data settings
$PASHS,RAW,ALL
Disabling all raw data mes-
sages
$PASHS,RAW,PER Raw data output rate
$PASHS,RCP,GB.. GLONASS biases
$PASHQ,RCP Receiver parameters
$PASHS,RCP,DEL Delete user-defined rec. name
$PASHQ,RCP,OWN Receiver name
$PASHS,RCP,REF Naming reference receiver $PASHQ,RCP,REF Reference receiver name
$PASHQ,RDP,CHT Radio channel table
$PASHQ,RDP,LVL Radio reception level
$PASHS,RDP,OFF Powering off internal radio
$PASHS,RDP,ON Powering on internal radio
$PASHS,RDP,PAR Setting the radio $PASHQ,RDP,PAR Radio parameters
$PASHS,RDP,TYP Radio type used $PASHQ,RDP,TYP Radio type used
$PASHS,REC Raw data recording $PASHQ,REC Raw data recording
$PASHQ,RID Receiver identification
$PASHS,RNX,TYP ATOM RNX message
$PASHQ,RNX,MSI ATOM RNX message
$PASHS,RST Default settings
$PASHQ,RTC RTCM status
$PASHS,RTC,MSG User message
$PASHQ,RTC,MSI RTCM messages status
$PASHS,RTC,TYP RTCM message type
$PASHQ,RWO Raw data output settings
$PASHS,SBA SBAS tracking (ON/OFF) $PASHQ,SBA SBAS tracking status
$PASHS,SIT Site name $PASHQ,SIT Site name
$PASHS,SNM Signal/noise ratio mask (PVT) $PASHQ,SNM Signal/noise ratio mask (PVT
$PASHS,SOM Masking signal observations $PASHQ,SOM Masking signal observations
$PASHS,SOM,CTT Cumulative tracking time mask $PASHQ,SOM,CTT Cumulative tracking time mask
$PASHS,SOM,NAV Navigation data mask $PASHQ,SOM,NAV Navigation data mask
$PASHS,SOM,SNR Signal-to-Noise ratio mask $PASHQ,SOM,SNR Signal-to-Noise ratio mask
$PASHS,SOM,WRN Channel warnings mask $PASHQ,SOM,WRN Channel warnings mask
Table 1. Receiver Configuration Commands (Continued)
Set Command Description Query Command Description