Instructions / Assembly

Maintenance Tips:
Clean the Auger Bit: After each use, clean the auger bit thoroughly to remove any wood chips, dirt, or
debris. Use a brush or compressed air to clean the spirals.
Inspect for Damage: Regularly inspect the auger bit for any signs of damage, such as bent or dull edges.
Replace or sharpen the bit as needed.
Sharpen the Auger Bit: If the cutting edges become dull, use a file or a specialized auger bit sharpener to
restore the sharpness.
Lubricate Metal Parts: Apply a thin layer of oil or lubricant to the metal parts of the auger bit to prevent
rust and ensure smooth operation.
Store Properly: Store the auger bit in a dry place and, if possible, in a protective case to prevent damage
and rust.
Check for Loose Parts: Periodically check for loose screws or any other components. Tighten or replace
as necessary.
Follow Manufacturer Guidelines: Refer to the manufacturer's guidelines and recommendations for
specific maintenance procedures and any additional care instructions.
By following these instructions and maintaining your auger drill bit properly, you can ensure that it
remains a reliable and effective tool for your drilling needs.