Instruction Manual

PAGE 8
PARTS LIST
BUCKET, APRON & CUTTING EDGES
B-400 SCRAPER
Key No. Part No. Description
1 40014A Bucket (used on sn 2673 and up)
40014 Bucket (used up to sn 2672)
2 30016 Shoulder pin, 1-1/4" to 1" NF w/ctsk hole in head
Nut, 1" NF
3 B40015 Bushing, 1-1/2" OD x 1" ID x 1-11/32" long,
(used on sn 2673 and up)
4 Bolt, HT 1" x 4" NF w/nut and LW
(used on sn 2673 and up)
40022 Pin, 1-1/4" x 3-1/4" (used up to sn 2672)
Narrow rim washer, 1-1/4" ID
Cotter pin, 1/4" x 2"
5 B40023 Pin, 1-1/4" x 2-3/4" w/locking head
(used on sn 2673 and up)
40022 Pin, 1-1/4" x 3-1/4" (used up to sn 2672)
Narrow rim washer, 1-1/4" ID
Cotter pin, 1/4" x 2"
6 205R Right cutting edge, 4"
7 408C Center cutting edge, 6"
8 206L Left cutting edge, 4"
9 30017RW Right cutting edge, 6" (optional)
10 Plow bolts, 1/2" x 1-1/2" w/nuts
Plow bolts, 1/2" x 1-3/4" w/nuts
11 30018LW Left cutting edge, 6" (optional)
B40024 One-piece cutting edge, 6" (optional, not shown)
B40025 Cutting edge pitch control wedge (optional, not shown)
12 40015 Apron