Manual

PAGE 8
PARTS LIST
BUCKET, APRON & CUTTING EDGES
B-300 SCRAPER
Key No. Part No. Description
1 30016 Shoulder pin, 1-1/4" to 1" NF, ctsk hole in head
Nut, 1" NF
Lockwasher, 1
Zerk, 1/8" NPT straight
2 30014A Bucket, (used on sn 2637 and up)
30014 Bucket, (used up to sn 2636)
3 B4505 Pin, 1-1/4" x 2-3/8" w/locking head (used on sn 2637 & up)
Bolt, 1/2" x 1" NC w/nut and LW
405 Pin, 1-1/4" x 3", (used up to sn 2636)
Narrow rim washer, 1-1/4" ID
Cotter pin, 1/4" x 2"
4 B4504 Bushing, 1-1/2" OD x 1" ID x 1-3/32" long
(used on sn 2737 & up)
5 Bolt, HT 1" x 3-1/3" NF, w/nut & LW (used on sn 2637 & up)
405 Pin, 1-1/4" x 3", (used up to sn 2636)
Narrow rim washer, 1-1/4" ID
Cotter pin, 1/4" x 2"
6 205R Right cutting edge, 4"
7 3105037 Center cutting edge, 6"
8 206L Left cutting edge, 4"
9 30017R Right cutting edge, 6" (optional)
10 Bolt, 1/2" x 1-1/2" w/nuts
Bolt, 1/2" x 1-3/4" w/nuts
11 30018LW Left cutting edge, 6" (optional)
12 30015 Apron