OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS After Eight Perfect Ten Five Fifteen Perfect Ten MiniRig
Thank you for purchasing your Ashdown Engineering Amplifier. If you live in the UK, please register your purchase by completing this form and return it to the following address: Ashdown Engineering, The Old Maltings, Hall Road, Heybridge, Maldon, Essex CM9 4NJ, England (Alternatively you can register online at http://www.ashdownmusic.com) If you live outside the UK, the local Ashdown distributor may have included a specific registration form for your country.
Important Safety Instructions BASIC PRECAUTIONS WARNING - When using electrical products, basic precautions should be followed, including the following: 1. Read all the instructions before using the product. 2. Do not use this product near water – for example, near a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool. 3. This product may cause permanent hearing loss. Do not operate for long periods of time at a high volume level or at any level that is uncomfortable.
Front Panel Diagrams AFTER EIGHT, PERFECT TEN, PERFECT TEN MINIRIG, FIVE FIFTEEN After Eight Perfect Ten MiniRig Five Fifteen I 65 o Perfect Ten
Rear Panel Diagrams AFTER EIGHT, PERFECT TEN, PERFECT TEN MINIRIG, FIVE FIFTEEN I o After Eight I o Perfect Ten Perfect Ten MiniRig I Five Fifteen o
Operating Instructions FRONT PANEL REAR PANEL SPECIFICATIONS INPUT – A single input jack socket is provided for your instrument. This is a high impedance input designed to perfectly match the impedance of the pick-ups on a passive bass. It also has sufficient headroom available to allow active basses to be used. Use the Input Gain control to adjust for the sensitivity of your instrument. FUSED MAINS INLET SOCKET – This is for connection of the unit to your countries mains power supply.
www.ashdownmusic.
