User guide

101B224-01 DIN-Rail Mounting Kit Instruction Manual

Step 3

Mounting modules to DIN-

rail.

To mount modules to DIN-

rail, rst locate the approxi-

mate position you would like

to place the module on the

DIN-rail, then hook hinge end

of mounting clip to edge of

DIN-rail as shown to the right.

Then lower the opposite “latch

end” of the clip onto the rail.

Press down on the module

until the latch end snaps in

place.

Hinge EndLatch End

A typical installation may

look like the photo to the

right once modules are

mounted to the DIN-rail.

Step 4

After mounting the expansion module(s), please refer to the

Instruction Manual for each module for proper wiring and use

instructions.