Specifications

ManualsBrandsASG ManualsAirgun AccessoriesParts kit, For Dan Wesson, CZ, STI 4.5mm and 6mm Pistols and Revolvers

1

2

3

4

Guide to Dan Wesson

16101, 16182, 16183, 17115, 17176, 17177

Procedure for mounting of gasket repair kit – 17131

Side 4 – NC – 001 - 2012

13. Placing the new gaskets:

a. Note the notch in the gasket

14. Placing the valve section:

a. Slide the valve section onto the holding pin

b. Tighten the 2mm screw with the PH1 driver

15. Placing the hammer assembly:

a. Get the spring guide into place

b. Slide the assembly onto the holding pin

16. Mounting the cover plate:

a. Take care not to over tighten the 4 screws

b. Use the PH2 driver

17. Replace the grip:

a. Slide the front plastic part first

b. Attach the CO2 cartridge lid last

c. You are done 