User manual
Table Of Contents
- 1. Introduction
- 2. Pre-Installation
- 3. Programming the VoWiFi Handset
- 4. Installation of VoWiFi Handsets
- 5. Maintenance
- 5.1 Handset
- 5.1.1 Configure Spare Handsets without a Number in Large Systems
- 5.1.2 Upgrade Handset Software
- 5.1.3 Upgrade Software OTA via TFTP
- 5.1.4 Upgrade Software via PDM
- 5.1.5 Upgrade Software Over the Air (OTA) via Centralized Device Management (IMS3)
- 5.1.6 Recapture the Earlier Software
- 5.1.7 Upgrade Handset Functionality using License
- 5.1.8 Perform a Factory reset
- 5.2 Replacement of Handsets
- 5.3 Change Number of a Handset
- 5.4 Update Parameters via IMS3
- 5.5 Perform a Security Upgrade via IMS3
- 5.6 Upgrade the Template
- 5.7 Create a Configuration Backup
- 5.1 Handset
- 6. Handset Configuration
- 6.1 Select Network
- 6.2 IP Address Settings
- 6.3 Network Settings
- 6.4 Security Settings
- 6.5 Handset Settings
- 6.5.1 Automatic key lock
- 6.5.2 Phone lock
- 6.5.3 Audio adjustment
- 6.5.4 Headset Configuration
- 6.5.5 In Charger Behavior
- 6.5.6 Configure Profiles
- 6.5.7 Hide Missed Call Window
- 6.5.8 Battery Warning
- 6.5.9 Shared Phone
- 6.5.10 Prevent Handset Switch off
- 6.5.11 Uploadable Language
- 6.5.12 Select Default Language
- 6.5.13 Short cuts
- 6.5.14 Soft Key Functions During Call
- 6.5.15 Import Contacts
- 6.5.16 Company Phonebook
- 6.5.17 Central Phonebook
- 6.6 Messaging and Alarm
- 6.7 Messaging Settings
- 6.8 Alarm Settings
- 6.9 Telephony
- 6.9.1 Endpoint ID and Endpoint number
- 6.9.2 VoIP Protocol
- 6.9.3 Codec
- 6.9.4 Offer Secure RTP
- 6.9.5 Internal Call Number Length
- 6.9.6 Emergency Number
- 6.9.7 Voice Mail Number
- 6.9.8 Message Centre Number
- 6.9.9 Max number of Call Completions
- 6.9.10 Dial Pause Time
- 6.9.11 Direct off Hook from Charger
- 6.9.12 Replace Call Rejected with User Busy
- 6.9.13 Busy on 1 / Disable call waiting
- 6.9.14 Calling Line Restriction
- 6.10 Regional Settings
- 6.11 Display
- 6.12 Menu Operation
- 6.13 Push-To-Talk (PTT) Group Call
- 6.14 Presence Management
- 6.15 Location
- 7. Use Handset to Verify the VoWiFi System Deployment
- 8. Handset Internal Web Administration Page
- 9. Administration
- 10. Troubleshooting
- 11. Related Documents
- 12. Document History
- Appendix A: Working with Templates
- Index
- Contents
TD 92675EN
20 June 2012 / Ver. E
Configuration Manual
Ascom i62 VoWiFi Handset
39
6. Handset Configuration
3 The following settings for the profile can configured:
•Profile name
• Internal/External/Call
bac
k ring signal
•Ring volume
•Vibrator
• Key sound
• Message alert signal
1
•Answering settings
• Diversion settings
Diversions
Calls can be diverted to other phone numbers, for exam
ple when busy.
1 In the applicable profile, select Diversions.
2 Activate a diversion by selecting “Enable” in t
he applicable diversion drop-down lists.
The following diversions are possible:
• Activate diversions for all calls
• Activate diversions on user busy
• Activate no answer diversions
3 Enter the diversion number in the applicable diversion number text field.
4 If the handset is configured to access the
PBX
via SIP protocol, the handset can be
configured to manage the diversion locally instead of using the PBX. Requires that
the handset is within the coverage area and is switched on.
Select VoIP > SIP. In the Call
forward locally drop-down list, select “Enable“.
6.5.7 Hide Missed Call Window
A missed call is by default indicated by a Missed
call window. It is possible to hide this
window, for example, if both a handset and a mobile is used. If the user answers the call
using the mobile, the Missed call window will not be displayed in the handset.
1 Select Device > Call.
2In the Show miss
ed calls popup drop-down list, select “No” to hide the Missed call
window.
6.5.8 Battery Warning
1 Select Device > Settings
2In the Battery wa
rning drop-down list, select one of the following:
• Sound repeatedly
•Sound once
•Sound off
6.5.9 Shared Phone
1. Applicable to Messenger and Protector only.