Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
83
8.9 Device Overview
8.9.1 Radios
Information about the devices in the IP-DECT system.
1 Select Device Overview > Radios.
Figure 45 .
Figure 32. Device Overview in the Master IPBS
Figure 46 .
Figure 47 .
Add Radios
In the Uninitalized Registrations section, uninitialized Radios not registered to a PARI
Master are shown.
1 Select Device Overview > Radios
2 Click "Add" to add the Radio to the Master.
3In the Add Radio window enter a name for the device. You can also add a Standby
Master IP Address.
4 Click "OK".
5 The Radio restarts and it establishes a connection to the PARI Master only.
Name The unique identification name. The name syntax
is ipbs-xx-xx-xx (or ipbl-xx-xx-xx), where xx-xx-xx
should be replaced with the last 6 hexadecimal
digits of the MAC address.
RFPI Radio Fixed Part Identity.
IP Address The IP address, click on the IP address to access
the configuration GUI of that IPBS/IPBL.
Sync The current synchronization status.
Should be "Master OK" or "Slave OK" if
synchronized.
LDAP The LDAP status, can be "" (blank), "-", "up",
"server" or "down".
Should be "-", "up" or "server".
Device Name The name entered in the general menu.
Version The current software version.
Connected Time The elapsed time since connected to the Master.