Operating instructions

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

3 Enter the Message Center Number in the Fix Message Center No. field.

The MWI enabled check box is only relevant if the field above is left blank. In this

case select the MWI enabled check box to send a notification to your own number

instead of the Message Center Number.

Note: For some IP-PBXs no configuration is necessary for this service.

4 Enter the number of the message center in the Local Clear of MWI field to clear the

message waiting indication locally when dialling the number.

5 Click "OK".

6 Reset in order to make the changes take effect, see 8.16 Reset on page 113.

Figure 42.

Figure 31. Supplementary services

8.5.12 Select Mode

1 Select DECT > Master.

2 Select in the Mode drop-down list:

• "Active", if this IPBS/IPBL is the Master.

• "Standby", if this IPBS/IPBL is the Standby Master.

• "Deployment" is used only for coverage test. The speech from the handset is

looped back to the handset.

Call Completion Busy Subscriber Notifies the caller when a busy number

becomes available and reinitiates the call

Only works on H.323

Logout User Logs out the user and the Portable Device

becomes anonymously subscribed.

Clear Local Settings Clears all locally stored feature settings

and all features are deactivated

Feature Description