Operating instructions

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

1 Select DECT > System.

Note: To access the System tab, the Master mode has to be activated, see 8.5.12

Select Mode on page 70.

2 To enable, select the No Transfer on Hangup check box.

3 Click "OK".

8.5.10 Configure Coder

Select the preferred coder, and enter the desired frame length. If exclusive is selected for

the coder the IPBS/IPBL is forced to use that coder. With Silence Compression enabled no

information is sent during pauses in the conversation, this is used to save bandwidth.

Note: When exclusive is enabled for a coder it might be impossible to make calls outside

the IP-DECT system.

1 Select DECT > System.

Note: To access the System tab, the Master mode has to be activated, see 8.5.12

Select Mode on page 70.

2 Choose the applicable coder in the Coder drop-down list.

Note: The G726-32 coder is not supported by SIP.

3 Enter the sample time in milliseconds in the Frame text field.

4 Choose Exclusive enabled or disabled by selecting/clearing the Exclusive check box.

5 Choose Silence Compression enabled or disabled by selecting/clearing the SC check

box.

6 Click "OK".

8.5.11 Configure Supplementary Services

The supplementary services determine how to handle a call if for example busy or not

answered by the user.

1 Select DECT > Suppl. Serv.

Note: To access the Suppl. Serv. tab, the Master mode has to be activated, see

8.5.12 Select Mode on page 70.

2 Select the Enable Supplementary Services check box to activate the supplementary

services below. The default Activate and Deactivate feature codes are preset.

Note: To disable a specific service, select the Disable check box in front.

Feature Description

Call Forwarding Unconditional Forwards incoming calls to a given number

in all cases

Call Forwarding Busy Forwards incoming calls to a given number

if the Portable Device is busy

Call Forwarding No Reply Forwards incoming calls to a given number

if the call is not answered or there is no

coverage

Do Not Disturb Sets the Portable Device in busy mode

Call Waiting A second incoming call during a call is

indicated with a call waiting tone