Operating instructions

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

Note: If Ascom VoIP Gateway is the LDAP server, the password in the IPBS/IPBL must be

identical to the Ascom VoIP Gateway (PBX/Password).

1 Select DECT > System.

Note: To access the System tab, the Master mode has to be activated, see 8.5.12

Select Mode on page 70.

2 Write a system name in the System Name text field.

3 Enter a new password in the Password text field. Repeat the password.

4 Click "OK".

8.5.2 Change Subscription Method

The IP-DECT system can be set to use the following subscription methods:

• With User AC

•With System AC

• Disable

Figure 40 .

Select subscription method:

1 Select DECT > System.

Note: To access the System tab, the Master mode has to be activated, see 8.5.12

Select Mode on page 70.

2 Select subscription method in the Subscriptions drop-down list.

3 Click "OK".

8.5.3 Configure Authentication Code

If allow anonymous subscription method is selected it is needed for the IP-DECT system to

have an authentication code configured, select a code consisting of 4 to 8 numbers (0-9).

1 Select DECT > System.

Note: To access the System tab, the Master mode has to be activated, see 8.5.12

Select Mode on page 70.

2 Enter an authentication code in the Authentication Code text field.

3 Click "OK".

8.5.4 Select Tones

1 Select DECT > System.

Note: To access the System tab, the Master mode has to be activated, see 8.5.12

Select Mode on page 70.

2 Choose tones in the Tones drop-down list.

3 Click "OK".

8.5.5 Set Default Language

If the handset does not send language information to the system, this setting determine

which language that is displayed for some text messages (for example hung-up and

disconnected).