Operating instructions

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

1 In Windows, select "Run..." in the Start menu.

2 Enter "regedit" and click "OK" to start the Windows Registry Editor.

3 In the Editor go to the

"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters\

LDAPServerIntegrity" key.

4 Click on the key with the right mouse button and click "Modify".

5 Change the key value of 2 to the value of 1.

6 Click "OK".

8.4.4 Check LDAP Replicator Status

1 Select LDAP > Replicator-Status.

The following information can be checked:

• Server - The IP address and port of the LDAP server.

• Active Directory Replication - Current state of replication. Four states are

possible: Stopped, Starting, Up, Down

• remote - State of replication in the source directory. Three states are possible:

Stopped, Active, Completed

• notify - Number of change notifications received from the server

• paged - Number of objects received from AD server in response to paged search

requests

• no match - Number of objects received that are not matching the configured

LDAP filter condition

• discarded - Number of objects discarded because no suitable map is found

• local - State of replication in the destination directory. Three states are possible:

Stopped, Active, Completed

• notify - Number of change notifications sent to the server

• add - Number of locally added objects

• del - Number of locally deleted objects

• modify - Number of locally modified objects

• pending - Number of local objects waiting to be sent to the server

8.4.5 Expert tool

The Expert function should only be used after consultation with Ascom Technical Support.