Operating instructions

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

8.4.1 Configure LDAP Server

The IP-DECT system needs an LDAP server in some configurations. If the VoIP gateway is

setup as an LDAP server the Master should be setup as an LDAP replicator, see 8.4.3

Configure LDAP Replicator on page 61.

Setup the IPBS/IPBL as an LDAP server

Note: The selected user name and password must be the same in both the Master and the

Standby Master.

1 Select LDAP > Server.

2 Add a user, for example ldap-user, in the User text field.

3 Enter a password in the Password text field.

4 Select the Write Access check box.

5 Click "OK".

Figure 38 .

Figure 26. Setting LDAP User Name and Password

8.4.2 Check LDAP Server Status

1 Select LDAP > Server Status

The following information can be checked:

• connections - Total number of active connections to the LDAP server

• write connections - Number of write-enabled connections

• rx search - Number of received search requests

• rx modify - Number of received change requests

• rx add - Number of added objects

• rx del - Number of deleted objects

• rx abandon - Number of lost connections

• tx notify - Number of sent change notifications

• tx error - Number of sent error notifications

• tx error 49 - Number of sent error notifications due to invalid credentials

• tx error 50 - Number of sent error notifiatiosn due to insufficient access rights