Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
58
7 Click “OK”.
8 Reset in order to make the changes take effect, see 8.16 Reset on page 113.
9 Start the web-based configuration, using the static IP address.
8.2.3 Dynamic IP address via DHCP
The Radios can have dynamic IP address allocation if the network has an DHCP server.
1 Select LAN > DHCP.
2 Select “Client” in the Mode drop-down list.
3 Click “OK”.
4 Reset in order to make the changes take effect, see 8.16 Reset on page 113.
Note: If the DHCP lease time is shorter than the time-to-live of the name/IP address
association in the Windows Internet Name Service (WINS) server, it may cause a mismatch,
and a wrong device may be reached if its WINS name is used.
8.2.4 Link
The link setting should be set to "auto" under all normal circumstances.
8.2.5 Configure VLAN
Identity and priority settings for VLAN are done in the "LAN > VLAN" sub menu.
Note: It is necessary to have a VLAN with the same ID as configured in the IPBS/IPBL
otherwise it will not be possible to access the IPBS/IPBL.
8.2.6 View LAN Statistics
To view statistics of LAN events: Select LAN > Statistics
To reset the ethernet statistics counters: Click the clear-stat button.