Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
54
Self-signed Certificates
This section corresponds to option 2 in 4.2.2 TLS Certificates on page 16.
1 Select Configuration > General > Certificates.
2 Click the Create New hyperlink in the Device Certificate section. A window will
open.
3 In the window, select “Self-signed certificate” in the Type drop-down list.
4 Select/Enter the following settings:
5 Click “OK”.
6 A new key pair and a certificate will be created. This may take up to one hour
depending on the key strength selected. During this time the device will be fully
operational with the exception of https not working and the certificate tab pane
not being visible.
Figure 34.
Figure 35.
Field name Description
• Validity Enter the default validity in years. This is a mandatory
field.
• Key Select either the desired key strength (1024-bit, 2048-
bit, 4096-bit) or select to reuse the old key pair (this is
not recommended).
• Common Name Enter the domain name or IP address for the device.
This is the same value as entered in the web browser
when accessing the device.