Operating instructions
TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
52
2 Enter a name in the Community field if you are not using the standard community
name (public). The community text string acts like a password to regulate access to
the agent on the Base Station.
3 Enter a device name in the Device Name field. This field is optional and serves only
informational purposes.
4 Enter the name and phone number of the contact person in the Contact field. This
field is optional and serves only informational purposes.
5 Enter a location in the Location field. This field is optional and serves only
informational purposes.
6 Select the Authentification Trap check box to enable the sending of authentification
traps. Access via SNMP is only possible if the correct Community Name is entered. If
enabled a trap will be generated in the event of access with an incorrect
Community Name.
7 Enter the IP address of the desired trap destinations in the Trap Destinations field.
SNMP traps will be sent to all destinations.
8 Enter the IP address and mask of the networks that are allowed to send SNMP
requests. All networks are allowed if the field is empty.
9 Click "OK".
8.1.9 Certificates
The Certificates tab is part of IP Security in IP-DECT. For more information on IP Security,
see chapter 4 IP Security on page 14.
Select Configuration > General > Certificates.
As described in Certificate Handling Options on page 16, there are three possible
certificate options:
1 Default device certificate, see Default Device Certificate on page 53.
2 Self-signed certificates, see Self-signed Certificates on page 54.
3 Certificates signed by a Certificate Authority (CA), see Certificate Signing Request
(CSR) on page 55.
The following table describles the different functions.
Figure 33.
Field name Description
• Subject Click the hyperlink (under the Subject header) to display
certificate details in a window.
• PEM Click the PEM hyperlink (under the Download header) to
download the certificate in PEM format.
• DER Click the DER hyperlink (under the Download header) to
download the certificate in DER format.