Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
51
https traffic. The default value is 443. The value zero (0) disables https traffic
which is not recommended.
• Enter "Network Base Adresss" / "Network Base Mask" in the Allowed stations
text fields to only allow access only from matching network, for
example:172.16.0.0/255.255.0.0
•In the Active HTTP sessions field all ongoing HTTP traffic is displayed.
Figure 32 .
2 Click "OK".
8.1.7 Configure the HTTP Client settings
A list of URL that require authentication can be specified.
1 Select General > HTTP Client.
2 Enter the “URL” in the URL text field.
3 Enter "User" and "Password" in the User and Password text fields.
4 Click “OK”.
A new row will be shown and more URLs can be added.
8.1.8 SNMP
Faults can be reported in the IP-DECT system via the Simple Network Management
Protocol (SNMP). The SNMP framework has three parts:
• An SNMP manager: the system used to control and monitor the activities of network
hosts using SNMP.
• An SNMP agent: the software component within the managed device that maintains
data for the device and reports data, as needed, to managing systems.
• A MIB: The Management Information Base (MIB) is a virtual information storage area
for network management information.
The agent and MIB reside on a network device (for example, router, access server, or
switch). To enable the SNMP agent on the IPBS/IPBL, the relationship between the
manager and the agent must be defined.
Figure 25. Configure SNMP Settings
1 Select General > SNMP