Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
46
8 Operation
This section describes the settings in the Configuration and Administration menu, each
subsection represents a sub menu to the Configuration and Administration menu.
Some changes require a reset in order to take effect. It is possible to do several changes
before resetting the IPBS/IPBL.
The GUI for the IPBS and IPBL are similar. Screen shots from the IPBS are used as default.
8.1 General
This section describes how to do the following configurations and settings.
• Change User Name and Password
• Name the equipment
• Configure automatic firmware update
• Configure the NTP settings
• Configure Logging
• Configure the HTTP settings
Figure 30 .
Figure 22. Assigning a name, username, and password.
8.1.1 Change User Name and Password
The user name and password us used to access the IPBS/IPBL through the web GUI.
1 Select General > Admin.
2 Write a user name in the User Name text field.
3 Enter a new password in the Password text field. Repeat the password in the
second text field.
4 Click "OK".
8.1.2 Name the IPBS/IPBL
Each IPBS/IPBL can be assigned a name. It is recommended to assign a descriptive name
for example IPBS/IPBL location.