Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
44
2 Enable anonymous registration by selecting "With System AC" in the Subscriptions
drop-down list.
3 Click "OK".
4 Perform an "over air subscription" using the system Authentication Code. For
information on how this is done, see the reference guide of the Portable Device.
The Portable Devices’ IPEI number appears in the Anonymous list. To view the list:
Select Users > Anonymous.
5 Assign the Portable Device to any user, subscribed or unsubscribed, on any Master
defined in the system by calling the desired Master id & extension & optional
individual AC code and hang up.
Example where 0 is the Master id, 200 is the extension and 1234 is the AC code:
*0*200*1234#
Note: When using AC code, start with * and end with # character. Otherwise skip
the *# characters. If the user is already assigned to a Portable Device, it will be
moved to the anonymous list when logging in a new Portable Device.
6 Repeat step 4 to 6 for all Portable Devices.
7 Under the Configuration menu, select DECT > System.
8 Disable anonymous registration by selecting "Disable" in the Subscription drop-
down list.
9 Click "OK".
7.12.2 Individual Registration
1 Select Users.
2 Click "New".
3 Enter the following information in the corresponding text fields:
• Long Name - The name of the user, need to be unique throughout the system.
This is the name presented in a called party´s display, unless this is configured in
the IP-PBX.
• Name - The user name.
• Number - The phone number extension, need to be unique throughout the
system.
• Password - Optional, is used for registration towards the gatekeeper.
• Display Name - Will be showed in the Portable Device display when the Portable
Device is idle.
• IPEI - The unique identification number of the Portable Device.
• Auth. Code - The individual authentication code for this user.
4 Perform an "over air subscription" using the individual authentication code. For
information on how this is done, see the reference guide of the Portable Device.
5 Click "OK".
7.13 Logout/Login Users
This section describes how to logout and login users to the Ascom IP-DECT system. For
example, when using a shared Portable Device for shift workers.
7.13.1 Logout Users
Logout the Portable Device for any subscribed user in the system by calling the
supplementary services feature for logout (see 8.5.11 Configure Supplementary Services