Manualshelf

Operating instructions

ManualsBrandsASCOM ManualsComputer equipmentTD 92375GB
41424344454647484950
TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
38
8 Enter a password.
9 Confirm the password.
10 Select "Administration of All Users" in the Rights drop-down list.
11 Click "OK".
View and Modify a User Administrator
1 Login as System Administrator (see 7.3.5 System Administrators on page 35).
2 Select Administration > Users.
3 Click on show.
A two-part list page is displayed. At the top are the user administrator accounts and
below the user administrators are the user accounts, both listed in alphabetical
order.
4In the User Administrators section, click on a hyperlink below the Long Name
heading. A detail window is opened.
5 Select/Edit any of the following settings:
• Long Name
• Name (Note: This field is used for login)
• Password
•Confirm Password
• Rights
6 Click "OK".
Delete a User Administrator
1 Login as System Administrator (see 7.3.5 System Administrators on page 35).
2 Select Administration > Users.
3 Click on show.
4In the User Administrators section, click on a hyperlink below the Long Name
heading. A detail window details for is opened.
5 Click on "Delete".
The User Administrator is deleted and the windows is closed.
7.4 Configure the Mobility Master
In a system with two or more Masters (Multiple Master system), a Mobility Master must be
configured. For more information on Multiple Master Systems, see the document System
Planning, Ascom IP-DECT System, TD 92422GB.
This section describes how to configure the Mobility Master. Each configuration step is
briefly described in the step list below. For more detailed information see the
corresponding subsection in 8 Operation on page 46.
1 Determine the address and access the GUI, see 7.2 Access the GUI on page 31.
2 Change the default password, see 7.2.2 Change the Default Password on page 33.
3 Set a static IP address and set DHCP to off, see 8.2.2 Set a Static IP Address on page
57.
4 Set the mode to Mobility Master, see 8.5.17 Select Mobility Master Mode on page
73.