Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
37
3 On the next free account row:
• Enter User Name
• Enter Password
• Enter Password again
• Select Administrator (for System Administrator) or Auditor in the drop-down list
(See
7.3.2 Access Levels on page 34 for a description of access levels.)
4 Click "OK".
The account row is created.
Modify An Additional Account
To modify an additional administrator account do the following:
1 Login as system administrator (see Login as System Administrator on page 35).
2 Select Configuration > Admin.
3 On an existing account row:
• Enter a new user name
• Enter a new password
• Enter the password again
• Select Administrator (for System Administrator) or Auditor in the drop-down list
(See
7.3.2 Access Levels on page 34 for a description of access levels.)
4 Click "OK".
The account row is updated.
Delete An Additional Account
To delete an additional administrator account do the following:
1 Login as system administrator (see Login as System Administrator on page 35).
2 Select Configuration > Admin.
3 On the row to be deleted, select the Delete check box.
4 Click "OK".
The account row is deleted.
Managing User Administrators
Create a User Administrator
IPBS/IPBL is not supplied with preinstalled user administration accounts. Therefore, the first
user administration account must be created by a system administrator. If additional user
administration accounts are needed they must also be created by a system administrator.
1 Login as System Administrator (see Login as System Administrator on page 35).
2 Select Administration > Users.
3 Click the show hyperlink.
The User Administration page (see figure 20 on page 35 for a sample) is displayed.
4 Click the new hyperlink. A window is opened.
5 Select the User Administrator radio box. The window layout transforms.
6 Enter a long name.
7 Enter a name (Note: This field is used for login).