Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
36
5 Click on the Admin tab.
The Administration page is displayed. See the figure below for a sample
Figure 21. System Administrator Admin Page
This page is used for the following tasks.
• Managing the default System Administrator account, see Admin Section on page 36.
• Managing additional System Administrator accounts, see Additional Administrator
Accounts on page 36.
Admin Section
The Admin section (the upper part of the page) displays the default System Administrator
account. This account can be modified (see the following section) but cannot be deleted.
Modify Admin Account
1 Login as system administrator (see Login as System Administrator).
1 Select Configuration > Admin.
2 Select/Enter the following settings:
Note: Only changing the password will not result in the settings being saved. For
the settings to be saved, both user name and password must be updated at the
same time!
3 Click "OK".
Additional Administrator Accounts
The Additional Administrator Account section (the lower part of the page) displays a list of
existing additional system administrator accounts.
Create An Additional Account
To create an additional administrator account do the following:
1 Login as system administrator (see Login as System Administrator on page 35).
2 Select Configuration > Admin.
Figure 29.
Field name Description
• Device Name Enter a description for the device.
• User Name Enter a login user name.
• Password Enter a password.
• Confirm Password Confirm the password.