Operating instructions

ManualsBrandsASCOM ManualsComputer equipmentTD 92375GB

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

6.2 Pin the IPBL Cable

All data cables used for the IPBL is standard CAT5 unshielded cable. It is assumed that

installation personnel know how to crimp these connectors to a cable.

6.2.1 Synchronization Cable

The maximum cable length between two IPBLs must not exceed 2000 meters.

1 Cut the cable to the correct length.

2 Connect the cable to a RJ45 modular jack. For information on pinning, see Figure

13 and Figure 14.

3 Label the cable.

Sync IN

Figure 21 .

Figure 13. Connector pinning of the Sync IN cable

Sync OUT

Figure 22 .

Figure 14. Connector pinning of the Sync OUT cable

RJ45

modular jack

Sign Tx +

Sign Tx -

Sign Rx +

Rx +

Rx -

Sign Rx -

Tx +

Tx -

Sign = Signalling

Rx = Reciever data pair

Tx = Transmitter data pair

026

15432678