Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
22
Pin the IPBS Cable
Figure 16 .
Figure 7. Connector pinning of the LAN/PoE connector, power feed over the spare
cable pairs.
Figure 17 .
Figure 8. Connector pinning of the LAN/PoE connector, power feed over the Rx/Tx
data cable pairs.
Pin the BS3x0 Cable
Figure 18 .
Figure 9. Connector pinning of the Data connector
IMPORTANT: If local power supply is used, the EPP cable pair must not be connected.
RJ45
modular jack
Tx Tx Rx Pwr Pwr Rx Pwr Pwr
Pwr = Power pairs
Rx = Reciever data pair
Tx = Transmitter data pair
014
15432678
RJ45
modular jack
Tx/Pwr Tx/Pwr Rx/Pwr Spare
Spare
Rx/Pwr Spare
Spare
NC = Not Connected
Rx/Pwr
= Reciever & power pair
Tx/Pwr = Transmitter & power pair
015
15432678
RJ45
modular jack
EPP-b EPP-a SC1-a SC0-a SC0-b SC1-b NC NC
NC = Not Connected
EPP
= Express Power Pairs
SC = Serial Channel
008
15432678