Operating instructions

TD 92579GB
2009-04-15/ Ver. B
Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)
110
8.15.5 Performance
It is possible to check different performance parameters. For a description of the
parameters, see the table below.
Figure 62 .
1 Select Diagnostics > Performance
2 Select the checkbox(es) for the desired performance statistics.
3 Click "OK".
4 One window shows statistics for the last 24 hours. The maximum possible value is
displayed in the top-left corner. Click the left or right arrow buttons to see different
time frames.
8.15.6 Config Show
Config Show displays the configuration as a text output.
Code A unique number that identifies the alarm. Click the
code to get more detailed information about the
alarm. For a list of possible codes and their
descriptions, see
10.2 Fault Code Descriptions on
page 116.
Severity It has three possible states:
• Critical - Immediate action is
required. It is displayed, for
example, if a managed object goes
out of service.
• Major - Urgent action is required. It
is displayed, for example, if the
capability of the managed object is
severely degraded.
• Indeterminate - Level of severity
cannot be determined
Remote The IP Address of the object that reported the alarm.
Click the IP address to access the object.
Source The software modul that reported the alarm.
Together with the oode it uniquely identifies an
alarm.
Description A textual description of the alarm.
Parameter Description
CPU Shows CPU utilization
CPU-R Shows utilization of CPU resources allocated by
different tasks
MEM Shows memory utilization
Concurrent calls Shows the number of ongoing calls
Temperature (only for Gateways) Shows the temperature of the cabinet
Voltage (only for Gateways) Shows the power supply voltage level
Current (only for Gateways) Shows the power supply current consumption