Operating instructions

TD 92579GB

2009-04-15/ Ver. B

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway (software version 3.0.x)

1 Select Gateway > Routes.

All configured routes are shown in a routing table.

Figure 42. Clickable symbols in the Routes view

2 a. If no routes have been configured, click on the in front of From.

b. Add a new route by clicking on the leftmost in the route which you want to

insert the new route after.

Note the order of the routes here. The new route is always inserted after the current

entry. A new window opens.

Figure 43. New route window

3 Select the check boxes of the VoIP interfaces in the left area, to mark them as valid

sources for this route. Select interfaces which have been configured.

4 In the drop-down list in the right area, select the destination to which the calls are

to be connected. Select interfaces which have been configured.

Insert Map

below

Insert Map

above

Insert Route below

Edit CGPN Map

Edit Route

117

Number in

Number out

Name out